Seats

Fits: 86 Kawasaki KX 125 250 500 Please contact us with fitment questions. Description: Cover is very worn and the exposed foam is a bit rough but the pan is solid. Can still be ran as is but would make a good candidate to be restored.

Fits: 84 Honda XL 600 Please contact us with fitment questions. Description: Cover is in rough shape and the exposed foam has seen better days. Pan has rust on the threads and no front tab. An ugly seat is better than no seat though.

Fits: 2002-2008 Yamaha Grizzly 660 Please contact us with fitment questions. Description: Has been recovered but used and worn since then. Still a solid usable seat with good foam and no damage to the base.

Fits: 1982-1983 Suzuki GS 450 A Please contact us with fitment questions. Description: The left rear of the seat is torn at the seam and the same side of the plastic trim is damaged. Besides that a nice usable seat.

Fits: 82 Yamaha XJ 550 Maxim Please contact us with fitment questions. Description: No rips or tears and pan is in good shape. There is a small spot on the passenger top that something was spilled on it and it doesnt want to come off.

Fits: 1983-1985 Kawasaki KDX 200 Please contact us with fitment questions. Description: Overall in pretty rough shape but pan is not cracked and is better than nothing if you don’t have a seat at all.

Fits: 1984-1985 Honda VF 700 C Magna Please contact us with fitment questions. Description: Cover is torn but pan and foam are in good shape. Still a usable seat or can be used as a core to recover.

Fits: 1988-2006 Yamaha Blaster YFS 200 Please contact us with fitment questions. Description: Cover is rough but pan is in decent shape. Latch is rusty but not locked up. Would make a good candidate/core to recover and make nice again.

Fits: 1988-2006 Yamaha Blaster YFS 200 Please contact us with fitment questions. Description: Cover is rough but pan is in decent shape. Does not have a latch installed. Would make a good candidate/core to recover and make nice again.

Fits: 73-80 Kawasaki KM 80/100, KD 100 and MC1 Please contact us with fitment questions. Description: This is a used seat but the pan is cracked in two spots and the cover is torn.

Fits: 86 - 98 Kawasaki Vulcan VN 750 A Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. Has a tear in the top right side of the seat, and another very small tear...

Fits: 75 Kawasaki KD 125 Please contact us with fitment questions. Description: This is a used used, was off a bike that sat outside for year or so, the cover has that weathered look and feel but the foam should be salvageable and the pan just has some...