Powerdynamo Ignitions

Powerdynamo VAPE Ignition System Stator Magdyno MO1 Replace Lucas Single 1 Spark

(No reviews yet) Write a Review
SKU:
71 97 999 10
Condition:
New
  • Powerdynamo VAPE Ignition System Stator Magdyno MO1 Replace Lucas Single 1 Spark
  • Powerdynamo VAPE Ignition System Stator Magdyno MO1 Replace Lucas Single 1 Spark
  • Powerdynamo VAPE Ignition System Stator Magdyno MO1 Replace Lucas Single 1 Spark
  • Powerdynamo VAPE Ignition System Stator Magdyno MO1 Replace Lucas Single 1 Spark
  • Powerdynamo VAPE Ignition System Stator Magdyno MO1 Replace Lucas Single 1 Spark
  • Powerdynamo VAPE Ignition System Stator Magdyno MO1 Replace Lucas Single 1 Spark
  • Powerdynamo VAPE Ignition System Stator Magdyno MO1 Replace Lucas Single 1 Spark
  • Powerdynamo VAPE Ignition System Stator Magdyno MO1 Replace Lucas Single 1 Spark
  • Powerdynamo VAPE Ignition System Stator Magdyno MO1 Replace Lucas Single 1 Spark
  • Powerdynamo VAPE Ignition System Stator Magdyno MO1 Replace Lucas Single 1 Spark
  • Powerdynamo VAPE Ignition System Stator Magdyno MO1 Replace Lucas Single 1 Spark
  • Powerdynamo VAPE Ignition System Stator Magdyno MO1 Replace Lucas Single 1 Spark
$1,199.00

Description

This system has a 10 day handling time. Please allow up to 2 weeks before your item ships.

Magdyno to replace old Lucas magdyno MO1 units on motorcycles such as Gold Star, Ariel, Panther, Triumph 3HW, Matchless G50, AJS 7R and many others (not for Royal Enfield, there is a problem with fitting the cog on the shaft) with digital advance.
The unit to replace the flat mount Lucas magdyno is on the basis of our Bosch-type replacement. That means a optical deviation from the Lucas unit. It does however have the correct axle height of 44.6mm and the correctly positioned dowel or screw fastening holes at the bottom.
Axle taper is 1:5 (as on most Lucas and Bosch units).

The Powerdynamo ignition system is a magneto based generator with integrated, fully electronic ignition. It is equipped with a tiny AC regulator to run lighting equipment, thus eliminating the need to run a battery. Powerdynamo external flywheel type ignitions are an analog type, CDI ignition with 80-100 watts of 12-volt lighting capacity capable of delivering up to 40,000 volts!

The Powerdynamo external flywheel type ignition system is a magneto based generator with integrated, fully electronic ignition, equipped with a tiny AC regulator to run lighting equipment, thus eliminating the need to run a battery. The Powerdynamo ignitions bolt on with no engine case modifications. The system provides a higher output with a very solid spark, for easy starting and lighting that does not take away from the ignition coil.

Remember to change those 6 Volt bulbs with 12 volt bulbs!

Systems are available for the Bultaco, Hercules, KTM, Maico, Ossa, Sachs, Zundapp and small, medium and large shaft Husqvarna engines.

Motoplat Ignitions were imported and distributed by Penton from 1969 to 1993, the Spanish company's final year of production. We provide complete dynamic, diagnostic testing of the systems.
View AllClose