Powerdynamo Ignitions

Powerdynamo VAPE Ignition System Stator for KTM thru1996 440 500 550 90ODBase AC

(No reviews yet) Write a Review
SKU:
76 10 799 AC-5
UPC:
705464676470
Condition:
New
  • Powerdynamo VAPE Ignition System Stator for KTM thru1996 440 500 550 90ODBase AC
  • Powerdynamo VAPE Ignition System Stator for KTM thru1996 440 500 550 90ODBase AC
  • Powerdynamo VAPE Ignition System Stator for KTM thru1996 440 500 550 90ODBase AC
  • Powerdynamo VAPE Ignition System Stator for KTM thru1996 440 500 550 90ODBase AC
  • Powerdynamo VAPE Ignition System Stator for KTM thru1996 440 500 550 90ODBase AC
  • Powerdynamo VAPE Ignition System Stator for KTM thru1996 440 500 550 90ODBase AC
$499.99

Description

This system has a 10 day handling time. Please allow up to 2 weeks before your item ships.

90mm OD Base Plate
fits KTM Engines (no Sachs engines)
fits Rotax (Aprilia) 123, 127 Engines
fits Aprilia RX125, AF1 (with Motor Rotax 123)
fits Cagiva WMX125 (Fitted on right engine side)

Fits KTM Engines (no Sachs engines) with 90mm OD mount plate
1979-97 125cc all models without Sachs engine. (Eng # 51, 510, 500RV/LC, 501LC, 502LC/VC)
1979-86 175cc all models (Eng # 52, 520)
Thru 1989 250cc all models (Eng # 54, 530, 540, 541, 542RV, 543LV, 544LC, 545VC) some 1986-89 models also were offered with 110mm Stator plate. These applications require 7193799 (250cc engines with 545VC Eng #)
1986-93 350cc (Eng # 555LC, 561)
400/420cc with single lead coil (Eng # 55, 560) (will work with 495cc engines but have had complaints of hard starting. Eng # 563)
thru-1996 440/500cc (Eng # 565LC)
1992-96 550cc

12 Volt / 70 Watt AC

This is the A/C system and will run headlights and taillights.

This is a complete system including Rotor, Stator, Coil-CDI, Regulator (where applicable), Adaptor mounting plate (where applicable), Spark plug cap, Rotor Puller & hardware.

THIS PICTURE IS NOT AN ACCURATE REPRESENTATION OF THIS EXACT APPLICATION.

The Powerdynamo ignition system is a magneto based generator with integrated, fully electronic ignition. It is equipped with a tiny AC regulator to run lighting equipment, thus eliminating the need to run a battery. Powerdynamo external flywheel type ignitions are an analog type, CDI ignition with 80-100 watts of 12-volt lighting capacity capable of delivering up to 40,000 volts! Systems are available for Bultaco, Hercules, Husqvarna, KTM, Maico, Ossa, Sachs, Zundapp, and small, medium and large shaft Husqvarna engines.

The Powerdynamo external flywheel type ignition system is a magneto based generator with integrated, fully electronic ignition, equipped with a tiny AC regulator to run lighting equipment, thus eliminating the need to run a battery. The Powerdynamo ignitions bolt on with no engine case modifications. The system provides a higher output with a very solid spark, for easy starting and lighting that does not take away from the ignition coil.

Powerdynamo Ignitions are an analog type, CDI ignition with 80-100 watts of 12 volt lighting capacity, capable of delivering up to 40,000 volts! And remember to change those 6 Volt bulbs with 12 volt bulbs!

Motoplat Ignitions were imported and distributed by Penton from 1969 to 1993, the Spanish company’s final year of production. We provide complete dynamic, diagnostic testing of the systems.
View AllClose