Powerdynamo Ignitions

Powerdynamo MZ-B for Husqvarna 400 14mm Crank 90mmStator .7kg DC Ignition Stator

(No reviews yet) Write a Review
SKU:
71 25 799 DC-4
UPC:
705464676593
Condition:
New
  • Powerdynamo MZ-B for Husqvarna 400 14mm Crank 90mmStator .7kg DC Ignition Stator
  • Powerdynamo MZ-B for Husqvarna 400 14mm Crank 90mmStator .7kg DC Ignition Stator
  • Powerdynamo MZ-B for Husqvarna 400 14mm Crank 90mmStator .7kg DC Ignition Stator
  • Powerdynamo MZ-B for Husqvarna 400 14mm Crank 90mmStator .7kg DC Ignition Stator
  • Powerdynamo MZ-B for Husqvarna 400 14mm Crank 90mmStator .7kg DC Ignition Stator
  • Powerdynamo MZ-B for Husqvarna 400 14mm Crank 90mmStator .7kg DC Ignition Stator
  • Powerdynamo MZ-B for Husqvarna 400 14mm Crank 90mmStator .7kg DC Ignition Stator
  • Powerdynamo MZ-B for Husqvarna 400 14mm Crank 90mmStator .7kg DC Ignition Stator
  • Powerdynamo MZ-B for Husqvarna 400 14mm Crank 90mmStator .7kg DC Ignition Stator
$509.00

Description

This system has a 10 day handling time. Please allow up to 2 weeks before your item ships.

Fits Husqvarna
1971-1981 125 175 240 250 360 390 400 cc
Small Shaft-14mm/ .540 Crank End
90mm Base Plate
Replaces original Motoplat or SEM Magneto
12 Volt / 100 Watt
Rotor 0.7kg / 25oz
will fit 1981-1988 125 175 240 250 360 390 400
Small Shaft-only if mounted to the stock 130mm base plate.

This is the D/C system and will run head lights, tail lights, turn signals and charges the battery.
If the DC systems has R9522 regulator, then a battery is needed to flash the turn signals / lights
If the DC systems has R7300 regulator, then no battery is needed to flash the turn signals / lights

This is a complete system including Rotor, Stator, Coil-CDI, Regulator (where applicable), Adaptor mounting plate (where applicable), Spark plug cap, Rotor Puller & hardware.

THIS PICTURE IS NOT AN ACCURATE REPRESENTATION OF THIS EXACT APPLICATION.

The Powerdynamo ignition system is a magneto based generator with integrated, fully electronic ignition. It is equipped with a tiny AC regulator to run lighting equipment, thus eliminating the need to run a battery. Powerdynamo external flywheel type ignitions are an analog type, CDI ignition with 80-100 watts of 12-volt lighting capacity capable of delivering up to 40,000 volts! Systems are available for Bultaco, Hercules, Husqvarna, KTM, Ossa, Sachs, Zundapp, and small, medium and large shaft Husqvarna engines.

The Powerdynamo external flywheel type ignition system is a magneto based generator with integrated, fully electronic ignition, equipped with a tiny AC regulator to run lighting equipment, thus eliminating the need to run a battery. The Powerdynamo ignitions bolt on with no engine case modifications. The system provides a higher output with a very solid spark, for easy starting and lighting that does not take away from the ignition coil.

Powerdynamo Ignitions are an analog type, CDI ignition with 80-100 watts of 12 volt lighting capacity, capable of delivering up to 40,000 volts! And remember to change those 6 Volt bulbs with 12 volt bulbs!

Motoplat Ignitions were imported and distributed by Penton from 1969 to 1993, the Spanish company's final year of production. We provide complete dynamic, diagnostic testing of the systems.
View AllClose