Part came from a: 86 Kawasaki KL 250 Fits: 85-90 Kawasaki KL KLR 250 Please contact us with fitment questions. Description: The arm has a bend at the top and will need bent back for the pin. The rest is still ok. Can be used with the arm bent back

Part came from a: 86 Kawasaki KL 250 Fits: 85-05 Kawasaki KL KLR 250 (85-86 KL 600, 87-96 11-24 KLR 650) Please contact us with fitment questions. Description: This cover is still in good usable condition

Part came from a: 86 Kawasaki KL 250 Fits: 85-05 Kawasaki KL KLR 250 Please contact us with fitment questions. Description: This coil has has its connector cut off and will need a new one, it ohmed out to 150 ohms.

Part came from a: 86 Kawasaki KL 250 Fits: 85-05 Kawasaki KL KLR 250 Please contact us with fitment questions. Description: This transmission shows little wear to the gears, splines, and shift forks. Can be used as is.

Part came from a: 86 Kawasaki KL 250 Fits: 85-05 Kawasaki KL KLR 250 Please contact us with fitment questions. Description: There is little to no play in the sleeves, but it is recommended that the bushings be replaced before use.

Part came from a: 86 Kawasaki KL 250 Fits: 85-05 Kawasaki KL KLR 250 Please contact us with fitment questions. Description: Both caps have been loosened and this cover is still in good usable condition

Part came from a: 86 Kawasaki KL 250 Fits: 85-05 Kawasaki KL KLR 250 Please contact us with fitment questions. Description: This flywheel is still in good usable condition

Part came from a: 86 Kawasaki KL 250 Fits: 85-05 Kawasaki KL KLR 250 Please contact us with fitment questions. Description: This cover is still in good usable condition

Part came from a: 86 Kawasaki KL 250 Fits: 85-05 Kawasaki KL KLR 250 (88-11' KLR 650) Please contact us with fitment questions. Description: This wheel has rusty spokes and a very tiny wobble when on a stand, but it is not noticeable when a tire is on...

Part came from a: 86 Kawasaki KL 250 Fits: 85-86 Kawasaki KL 250 Please contact us with fitment questions. Description: This clutch basket shows normal signs of wear to the walls but nothing excessive. Will need a new bearing for the pressure plate.

Part came from a: Fits: 91-99 Polaris Trail Boss 250 2x4 4x4 6x6 (91-95, 98-99 Trail Blazer 250) Please contact us with fitment questions. Description: This carburetor is being sold for parts as it is missing some pieces, such as one of the bowl...

Part came from a: 86 Kawasaki KL 250 Fits: 85-86 Kawasaki KL 250 Please contact us with fitment questions. Description: Before purchasing this cover, make sure your engine serial number is KL250DE013185 and below, this was pulled from engine number...