Fits: 74 75 Honda CB 200T Please contact us with fitment questions. Description: A few small tears in the cover but is overall a solid usable seat. The chrome trim along the edges is cracking a bit and the latches have some surface rust on them.

Fits: 1989-2004 Yamaha YFM 350X Warrior Please contact us with fitment questions. Description: The two front mounts are stressed on the top area and it turned the plastic white and causes a small hole. Besides that is in good usable shape. Mounts are...

Fits: 1980 80 Yamaha YZ50 / 1981 81 Yamaha YZ 60 Please contact us with fitment questions. Description: OEM front fender that has been sanded so has that dusty rough look to it. The only damage is on the left side where the crease has started to split...

Fits: 85 Honda XL 80S Please contact us with fitment questions. Description: This has been painted but its flaking off. Is warped/bent a bit. I tried to bend it back into shape but its too stiff to do without heating it up. If your going to do that...

Fits: 03-06 Yamaha R6 Please contact us with fitment questions. Description: Has some scuffs in the center that were really hard to picture. Might be able to polish them out but most likely not. No cracks or other damage.

Fits: 84 85 Honda XL 80S Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. Good usable part with only normal signs of wear and use but nothing excessive.

Fits: 1986 KTM 125 Please contact us with fitment questions. Description: Im pretty sure on the fitment but theres a chance im wrong because the last 5ish inches of the pipe have been cut off.

Pro Armor Kill Switch Tether Wrist WrapPart Number - A040023This comfortable wrist strap makes using your Pro Armor Kill Switch better than ever! The Pro Armor Wrist Strap fastens with Velcro and is made of durable nylon webbing. It features a neoprene...

Fits: 1982 82 Kawasaki LTD CSR KZ 305 Right Side Cover 36001-1126-8G Please contact us with fitment questions. Description: A lot of heavy scratches and some small chips to the top corner but no major cracks and tabs are good. Good paintable cover.

Fits: 1973-1980 Yamaha GT GT1 MX 80 Please contact us with fitment questions. Description: Has been painted and looks good but does have some dents and dings. Has some rust inside but doesn’t seem excessive. I didnt pull the spark arrestor out but from...

Fits: 84 85 Honda XL 80S Please contact us with fitment questions. Description: Both are bent but do still dampen. Better than nothing if you don’t have any at all.

Fits: 1980 80 Can Am Qualifier 250 Please contact us with fitment questions. Description: Has a couple large dents on the top but no cracks or holes. As far as I can tell the spark arrestor Screen is not in this anymore, but the body for it is still...