Suspension

Part came from a: 14 Kawasaki KFX KSF 50 Fits: 07-25 Kawasaki KFX KSF 50 90 Please contact us with fitment questions. Description: Good usable part with only normal signs of wear and use but nothing excessive.

Part came from a: 87 Kawasaki Mojave 250 Fits: 87-04 Kawasaki Mojave 250 Please contact us with fitment questions. Description: This knuckle shows normal signs of wear but nothing excessive. A good usable knuckle

Part came from a: 80 Kawasaki KL 250 A3 Fits: 80 Kawasaki KL 250 A3 Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. Good usable part with only normal signs of wear...

Part came from a: 80 Kawasaki KL 250 A3 Fits: 80 Kawasaki KL 250 A3 Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. Good usable part with only normal signs of wear...

Part came from a: 80 Kawasaki KL 250 A3 Fits: 80 Kawasaki KL 250 A3 Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. Good usable part with only normal signs of wear...

Part came from a: 87 Kawasaki Mojave 250 Fits: 87-04 Kawasaki Mojave 250 Please contact us with fitment questions. Description: This knuckle shows normal signs of wear but nothing excessive. A good usable knuckle

Part came from a: Fits: 87-04 Honda TRX 250X 300EX Please contact us with fitment questions. Description: The carrier area is covered with rust on the inside, and the rubber guard has wear from the chain. The rest is still ok. Can be used as is.

Part came from a: 87 Kawasaki Mojave 250 Fits: 87 Kawasaki Mojave 250 Please contact us with fitment questions. Description: This shock has been bench tested and it feels normal when compressing and releasing. A good usable shock

Part came from a: 87 Kawasaki Mojave 250 Fits: 87-04 Kawasaki Mojave 250 Please contact us with fitment questions. Description: These tie rods show normal signs of wear but nothing excessive. A good usable set of tie rods

Part came from a: 03 Polaris Trail Blazer 400 Fits: 01-03 Polaris Trail Blazer 250(01-02) 400 Please contact us with fitment questions. Description: The ball joint and bearings all feel ok and the wheel hub spins freely. Can be used as is

Part came from a: 11 Polaris Sportsman 500 HO Carb Fits: 05-13 Polaris Sportsman 500 HO Please contact us with fitment questions. Description: Plan on replacing the bushing before use, the rest is still ok

Part came from a: 11 Polaris Sportsman 500 HO Carb Fits: 08-12 Polaris Sportsman 500 HO Please contact us with fitment questions. Description: Plan on replacing wheel bearing and bushing before use.