New

FitsMakeModelYearCan-AmOutlander 400 4x4 EFI2011-2014Can-AmOutlander 400 4x4 HO2008Can-AmOutlander 400 4x4 HO EFI2008-2010Can-AmOutlander 400 4x4 XT EFI2011-2014Can-AmOutlander 400 4x4 XT HO2008Can-AmOutlander 400 4x4 XT HO EFI2008-2010Can-AmOutlander...

SpecificationsTire Height:24Tire Width:10Wheel diameter:11Tire Size:24x10-11Ply:6Construction:BiasPosition:RearTube:Tubeless (TL)Tread Depth:15.2 mmClassification:All-terrainNumber:021161Product FeaturesDirectional tread pattern. An ideal tread for OE...

OEM Kawasaki Kicker, fits 2002-07 KX250. Inner diameter is 17mm.

Light machine work required for this to fit properly.Kick Starter and Shaft upgrade kit for 1999-01 KX 250.You will need to bore out your clutch cover kick shaft hole to .790 inches (the size of the new shaft).You will use your stock seal with this...

Fitment is suggested per the stock calipers and bar size. Installation may require additional items such as reservoir and bracket, mirror mount clamp, banjo bolt pressure switch or adjustment of the switches or housing units on the bar/clip on.We offer...

Fitment is suggested per the stock calipers and bar size. Installation may require additional items such as reservoir and bracket, mirror mount clamp, banjo bolt pressure switch or adjustment of the switches or housing units on the bar/clip on.We offer...

Fitment is suggested per the stock calipers and bar size. Installation may require additional items such as reservoir and bracket, mirror mount clamp, banjo bolt pressure switch or adjustment of the switches or housing units on the bar/clip on.We offer...

Fitment is suggested per the stock calipers and bar size. Installation may require additional items such as reservoir and bracket, mirror mount clamp, banjo bolt pressure switch or adjustment of the switches or housing units on the bar/clip on.We offer...

Fitment is suggested per the stock calipers and bar size. Installation may require additional items such as reservoir and bracket, mirror mount clamp, banjo bolt pressure switch or adjustment of the switches or housing units on the bar/clip on.We offer...

SpecificationsPart: PistonSize: 101.99 mmOversize: +0.02 mmPiston Type: HyperDryveCompression Ratio: 9.2:1Product FeaturesHyperdryve pistons are manufactured from a hypereutectic aluminum alloy to perform under operating conditions that would normally...

SpecificationsPart: Piston RingsSize: 67mmProduct FeaturesCompression rings are manufactured from either a highly ductile cast iron, or stainless steel alloy. The material of the rings is determined by the material of the cylinder wall the rings will be...

Fitment is suggested per the stock calipers and bar size. Installation may require additional items such as reservoir and bracket, mirror mount clamp, banjo bolt pressure switch or adjustment of the switches or housing units on the bar/clip on.We offer...