Engine

SpecificationsPart: PistonSize: 76.97 mmOversize: +0.02 mmPiston Type: ForgedProduct FeaturesForged pistons compared to standard cast pistons, offer superior tensile and yield srength at operating temps, and lower expansion rates (for tighter build...

Product Description Formulations are optimized specifically for Harley-Davidson hardware.Klotz V-Twin Oil Change Kits come with just the right amount of lubricant, no more no less. Top-tier additive package prevents wear, oxidation and corrosion...

SpecificationsPart: Top End KitSize: 94.97 mmOversize: +0.02 mmPiston Type: HyperDryveProduct FeaturesHyperdryve pistons are manufactured from a hypereutectic aluminum alloy to perform under operating conditions that would normally require a forged...

SpecificationsPart: Top End KitSize: 94.97 mmOversize: +0.02 mmPiston Type: HyperDryveCompression Ratio: 11.4:1Product FeaturesHyperdryve pistons are manufactured from a hypereutectic aluminum alloy to perform under operating conditions that would...

SpecificationsPart: Piston RingsSize: 66.84mmBore Type: For Nikasil CylinderProduct FeaturesCompression rings are manufactured from either a highly ductile cast iron, or stainless steel alloy. The material of the rings is determined by the material of...

SpecificationsPart: Piston RingsSize: 69.97mmProduct FeaturesCompression rings are manufactured from either a highly ductile cast iron, or stainless steel alloy. The material of the rings is determined by the material of the cylinder wall the rings will...

SpecificationsPart: Top End KitSize: 41.21 mmOversize: +1.25 mmPiston Type: CastRing Count: Dual RingCompression Ratio: 6.0:1Product FeaturesAnodized piston head increases strength and heat dissapation. MOST Namura pistons feature a machined head which...

SpecificationsPart: PistonSize: 96.97 mmOversize: +0.02 mmPiston Type: ForgedCompression Ratio: 12.5:1Product FeaturesForged pistons compared to standard cast pistons, offer superior tensile and yield srength at operating temps, and lower expansion rates...

OEM Kawasaki Kicker, fits 2002-07 KX250. Inner diameter is 17mm.

Light machine work required for this to fit properly.Kick Starter and Shaft upgrade kit for 1999-01 KX 250.You will need to bore out your clutch cover kick shaft hole to .790 inches (the size of the new shaft).You will use your stock seal with this...

SpecificationsPart: PistonSize: 101.99 mmOversize: +0.02 mmPiston Type: HyperDryveCompression Ratio: 9.2:1Product FeaturesHyperdryve pistons are manufactured from a hypereutectic aluminum alloy to perform under operating conditions that would normally...

SpecificationsPart: Piston RingsSize: 67mmProduct FeaturesCompression rings are manufactured from either a highly ductile cast iron, or stainless steel alloy. The material of the rings is determined by the material of the cylinder wall the rings will be...