Engine

Part came from a: 00 Polaris Trail Boss 325 Fits: 00-01 Polaris Trail Boss 325 Please contact us with fitment questions. Description: The lobes on this camshaft show little wear but nothing excessive. Can be used as is

Part came from a: 00 Polaris Trail Boss 325 Fits: 00-02 Polaris Trail Boss 325 Please contact us with fitment questions. Description: The chain guides show some minor wear from the chain but are still usable. A good usable set of timing parts

Part came from a: 99 Yamaha Big Bear 350 2x4 Fits: 97-99 Yamaha Big Bear 350 4x4 (99' 2x4) Please contact us with fitment questions. Description: This clutch basket shows normal signs of wear but nothing excessive. A good usable clutch basket

Part came from a: 05 Polaris Magnum 330 Fits: 04-12 Polaris Magnum Trail Boss Trail Blazer ATP 330 Please contact us with fitment questions. Description: This head has some minor pitting in the exhaust valve seat and on the valve itself. The intake boot...

Part came from a: 00 Polaris Trail Boss 325 Fits: 00 Polaris Trail Boss 325 Please contact us with fitment questions. Description: This oil cooler adaptor looks to still be in good usable condition

Part came from a: 99 Yamaha Big Bear 350 2x4 Fits: 97-99 Yamaha Big Bear 350 4x4 (99' 2x4) Please contact us with fitment questions. Description: This cylinder will need bored to the next size up as the walls are covered in rust. It is at the standard...

Part came from a: 00 Polaris Trail Boss 325 Fits: 00-01 Polaris Trail Boss 325 Please contact us with fitment questions. Description: The handle has a melted spot from the exhaust, and the ring inside sometimes gets stuck but that can be fixed with...

Part came from a: 99 Yamaha Big Bear 350 2x4 Fits: 99 Yamaha Big Bear 350 2x4 4x4 Please contact us with fitment questions. Description: The clutch adjuster screw is stuck to the nut and is hard to move. The bearings and seals are due to be replaced...

Part came from a: 93 Polaris 350L 4x4 Trail Boss Fits: 90-93 Polaris 350L 2x4 4x4 6x6 Please contact us with fitment questions. Description: The oil pump area of these cases is full of rust. The rest of these cases looks to be ok. A good set of cases,...

Part came from a: 92 Honda TRX 200 D Fits: 86-97 Honda TRX 200 D SX Please contact us with fitment questions. Description: This flywheel does not have a starter clutch bolted to it. The keyway looks to be ok. A good usable flywheel

Part came from a: Fits: 08 Cobra CX 50 SR King Please contact us with fitment questions. Description: The sprocket on the output shaft has some minor wear but can be used. All of the threads, splines, and teeth show normal signs of wear but nothing...

Part came from a: 00 Polaris Trail Boss 325 Fits: 00-02 Polaris Trail Boss 325 Please contact us with fitment questions. Description: The valves are worn at the seats and they have some minor pitting. The cam rockers have some wear on them as well. The...