Engine

Part came from a: 02 Kawasaki Prairie 400 4x4 Fits: 99-02 Kawasaki Prairie 400 4x4 Please contact us with fitment questions. Description: This clutch cover shows normal signs of wear but is still a good usable part

Part came from a: 02 Kawasaki Prairie 400 4x4 Fits: 97-02 Kawasaki Prairie 400 2x4 4x4 Please contact us with fitment questions. Description: This starter gear shows normal signs of wear but is still a good usable part

Part came from a: 02 Kawasaki Prairie 400 4x4 Fits: 99-02 Kawasaki Prairie 400 2x4 4x4 Please contact us with fitment questions. Description: All of the teeath on the gears look to be ok, as do the splines on the shafts. A good set of transmission gears...

Part came from a: 02 Kawasaki Prairie 400 4x4 Fits: 99-02 Kawasaki Prairie 400 2x4 4x4 Please contact us with fitment questions. Description: These oil lines look to still be in good usable condition

Part came from a: 03 Yamaha Kodiak 450 Fits: 03-10 Yamaha Kodiak Grizzly 450 (Wolverine 07-10) Please contact us with fitment questions. Description: This coolant reservoir will need cleaned out before use, it looks to still be in good usable condition

Part came from a: 02 Kawasaki Prairie 400 4x4 Fits: 99-02 Kawasaki Prairie 400 4x4 2x4 Please contact us with fitment questions. Description: This tank will need cleaned out before use, but it looks to still be in good usable condition

Part came from a: 02 Kawasaki Prairie 400 4x4 Fits: 99-02 Kawasaki Prairie 400 4x4 Please contact us with fitment questions. Description: This clutch shows normal signs of wear but nothing excessive, a good usable clutch

Part came from a: 02 Kawasaki Prairie 400 4x4 Fits: 97-02 Kawasaki Prairie 400 2x4 4x4 Please contact us with fitment questions. Description: This intake boot is not cracked and it a good usable part

Part came from a: 02 Kawasaki Prairie 400 4x4 Fits: 99-02 Kawasaki Prairie 400 2x4 4x4 Please contact us with fitment questions. Description: The wrist pin has little to no wear or play, the rod bearing has no up or down play. The keyway for the recoil...

Part came from a: 2001 Kawasaki KVF 300 Prairie 2WD Fits: 1999-2002 Kawasaki KVF 300 Prairie Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. Good usable part with...

Part came from a: 02 Kawasaki Prairie 400 4x4 Fits: 97-02 Kawasaki Prairie 400 2x4 4x4 Please contact us with fitment questions. Description: This cylinder will need bored to the next size up as the wall is covered is surface rust, it is at the standard...

Fits: 08 - 22 Can Am DS 90X 08 - 22 Can Am DS 90 Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. We guarantee this part to be good.