Engine

Part came from a: 04 Can Am DS 650 Baja X Fits: 03-07 Can Am DS 650 Baja X Please contact us with fitment questions. Description: Some light wear to the walls but none of the marks are deep enough to catch your fingernail. Should be serviced before use,...

Part came from a: 08 Kawasaki Prairie 360 Fits: 03-12 Kawasaki Prairie 360 Please contact us with fitment questions. Description: The valves and seats have some very minor pitting in them. The rest of this head shows normal signs of wear but nothing...

Part came from a: 08 Kawasaki Prairie 360 Fits: 05-12 Kawasaki Prairie 360 Please contact us with fitment questions. Description: One side of these cases has two snapped of bolts, the rest of these cases looks to be ok. Will need new bearings before...

Part came from a: 02 Suzuki GSXR 600 Fits: 01-03 Suzuki GSXR 600 Please contact us with fitment questions. Description: Bearing surfaces look good but should plan on replacing the bushings themselves before use. Seems to be a good usable crank

Part came from a: 20 CF MOTO CForce 400 S Fits: 16-21 CF MOTO CForce 400 500 S Please contact us with fitment questions. Description: Motor was filled with coolant when parted but no cracks or major issues besides two threads near the cylinder jug...

Part came from a: 11 Honda TRX 420 FM Rancher Fits: 07-11 Honda TRX 420 FM Rancher Please contact us with fitment questions. Description: No excessive wear to the rod bearing or wrist pin area. Good usable crank. These are non rebuildable.

Fits: 01-03 Suzuki GSXR 600 Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. We guarantee this part to be good.

Fits: 09 Yamaha RS Vector LTX Snowmobile Please contact us with fitment questions. Description: This is a used cylinder head that failed a leakdown test, there is a lot of corrosion on the valves. My best guess is it will need valves cleaned and/or...

Fits: 09 Yamaha RS Vector LTX Snowmobile Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. Measures 79.00mm, bore looks fine but the pistons have some minor corrosion...

Fits: 96-13 Polaris Ranger/Sportsman/Magnum/Xplorer/Scramber 500 Please contact us with fitment questions. Description: This is a used cylinder with a fresh bore and new Namura piston kit with gaskets.

Part came from a: 04 Yamaha R6 Fits: 03-09 Yamaha R6 Please contact us with fitment questions. Description: Threads all seem good and no cracks or major damage. Jugs have some light wear but I don’t see any deep grooves. Will need a hone at least.

Fits: 1988-2000 Suzuki GS 500E, 83-85 GS 300L, 85-88 GS 450L Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. Carefully removed to not damage the flywheel magnets or...