Engine

Engine pulled from a Hodaka 100, believe it was ACE but entire bike was parts from all different makes and models. Has compression and shifts through the gears, that’s about all I know about it...

Fits: 03 Yamaha XV 250 Virago Please contact us with fitment questions. Description: This is a used engine pulled from a complete running bike. Has around 5% leakage front and rear cylinders. Bore...

Part came from a: 95 Yamaha Kodiak 400 Fits: 93-98 Yamaha Kodiak 400 Please contact us with fitment questions. Description: This dip stick is still in good usable condition

Part came from a: Fits: 89-04 Yamaha Warrior 350 Please contact us with fitment questions. Description: This filter cover is stll in good usable condition

Part came from a: 95 Yamaha Kodiak 400 Fits: 93-99 Yamaha Kodiak 400 Please contact us with fitment questions. Description: The starter clutch works as it should and the rest is still ok as well. A...

Part came from a: 95 Yamaha Kodiak 400 Fits: 93-99 Yamaha Kodiak 400 Please contact us with fitment questions. Description: This head had a 4% leakdown on both the intake and exhaust valves. The...

Part came from a: 95 Yamaha Kodiak 400 Fits: 93-98 Yamaha Kodiak 400 Please contact us with fitment questions. Description: The outer seal will need replaced, but the rest is still ok

Part came from a: 97 Polaris Xplorer 500 Fits: 96-02 Polaris Xplorer Sportsman Scrambler 500 Please contact us with fitment questions. Description: This oil tank will need flushed before use, there...

Part came from a: 95 Yamaha Kodiak 400 Fits: 93-99 Yamaha Kodiak 400 Please contact us with fitment questions. Description: This recoil has been tested and it does work as it should.

Part came from a: 95 Yamaha Kodiak 400 Fits: 93-98 Yamaha Kodiak 400 Please contact us with fitment questions. Description: This gear is still in good usable condition

Part came from a: 95 Yamaha Kodiak 400 Fits: 93-99 Yamaha Kodiak 400 Please contact us with fitment questions. Description: This cylinder is currently at the stock bore of 83mm, will need honed or...

Part came from a: 98 Yamaha Big Bear 350 4x4 Fits: 97-99 Yamaha Big Bear 350 4x4 Please contact us with fitment questions. Description: This head was pulled from a running and driving unit. One of...