Brakes and Control

Part came from a: 1999 Yamaha YFM 600 Grizzly Fits: 1999-2001 Yamaha YFM 600 Grizzly Please contact us with fitment questions. Description: This is a good usable part.

Fits: 06 Ducati Multistrada 620 Red Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. We guarantee this part to be good.

Part came from a: 99 Polaris Sportsman 335 Fits: 99-00 Polaris Sportsman 335 Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. Good usable part with only normal...

Part came from a: Fits: 99-02 Polaris Xplorer 400 Please contact us with fitment questions. Description: This shifter has been tested on the unit, it shifts and locks in place as it should.

Part came from a: 02 Honda TRX 450 FM Foreman Fits: 02-04 Honda TRX 400 450 FM FE FW Please contact us with fitment questions. Description: This brake panel has been inspected, and it is in very good condition, one of the better brake panels I have seen...

Part came from a: 1987 Honda TRX 125 Fits: 1987-1988 Honda TRX 125 Please contact us with fitment questions. Description: One side is good and free, the other side the housing is broken in two pieces, upper part moves nice and free but the lower part...

Part came from a: 07 Polaris Outlaw 525 IRS Fits: 07-11 Polaris Outlaw 450 525 All Models Please contact us with fitment questions. Description: The fitting on the line is rusted and it does not spin on the line, but it will still thread in. The master...

Part came from a: 00 Polaris Trail Boss 325 Fits: 00 Polaris Trail Boss 325 Please contact us with fitment questions. Description: These brake lines have been cleared out with an air gun. A good usable set of brake lines

Fits: 2016 Beta 350 RR RR-S Four Stroke Please contact us with fitment questions. Description: This is a used part that has been tested and inspected to ensure quality. Tip of the lever is broken off.

Part came from a: Fits: 94-97 Polaris Sportsman 400 Please contact us with fitment questions. Description: This shifter is missing the handle and the lower boot is melted. Unsure if the switch harness works, and the shift shafts move with quite a bit...

Part came from a: Fits: 06 Cobra CX 50 SR King Please contact us with fitment questions. Description: The caliper and cylinder have been tested and they both work as they should. Only issue is the coating on the hose is disintegrating. A good usable...

Part came from a: 96 Polaris Xpress 400 Fits: 96-99 Polaris Xpress Xplorer 300 400 Please contact us with fitment questions. Description: This caliper has been tested and it does work as it should, the mechanical part works and the bleeder is free. A...