Brakes and Control

Part came from a: 11 Honda FSC 600 Silverwing Fits: 10-13 Honda FSC 600 Silverwing Please contact us with fitment questions. Description: Came from a tech school bike with only 23 miles on it.

Part came from a: 96 Polaris Xpress 400 Fits: 96 Polaris Xpress Xplorer 400 Please contact us with fitment questions. Description: The shifter is missing the cap for the handle and it has a small crack. The shifter itself moves and locks in place as it...

Part came from a: Fits: 94-97 Polaris Sportsman 400 Please contact us with fitment questions. Description: This shifter is missing the handle and the lower boot is melted. Unsure if the switch harness works, and the shift shafts move with quite a bit...

Part came from a: Fits: 06 Cobra CX 50 SR King Please contact us with fitment questions. Description: The caliper and cylinder have been tested and they both work as they should. Only issue is the coating on the hose is disintegrating. A good usable...

Part came from a: 96 Polaris Xpress 400 Fits: 96-99 Polaris Xpress Xplorer 300 400 Please contact us with fitment questions. Description: This caliper has been tested and it does work as it should, the mechanical part works and the bleeder is free. A...

Part came from a: 96 Polaris Xpress 400 Fits: 96-98 Polaris Xpress Xplorer 400 Please contact us with fitment questions. Description: These brake lines have been cleareed out and are in good usable condition

Part came from a: 01 Honda Rancher 350 TM Fits: 00-06 Honda Rancher 350 TM TE Please contact us with fitment questions. Description: The brake cylinders have been tested and they both work as they should. A good usable brake plate.

Part came from a: 01 Honda Rancher 350 TM Fits: 00-06 Honda Rancher 350 All Models Please contact us with fitment questions. Description: The seal area has some small broken spots, and one of the mounts is partially broken, but a bolt will still thread...

Part came from a: 01 Honda Rancher 350 TM Fits: 00-06 Honda Rancher 350 TM TE Please contact us with fitment questions. Description: The brake cylinders have been tested and they both work as they should. The knuckle looks to have a new ball joint. A...

Part came from a: 1999 Yamaha Blaster Fits: 90-02 Yamaha Blaster Please contact us with fitment questions. Description: OEM NISIN manual brake. It will need a new cable, the end is broken but it does work as it is supposed to.

Part came from a: 03 Yamaha Kodiak 400 2x4 Fits: 03 Yamaha Kodiak 400 2x4 (03-04' 4x4) Please contact us with fitment questions. Description: The brake plate will need some work to be usable, the cam and brake shoes move but they have a lot of...

Part came from a: 11 Honda TRX 420 FE Rancher Fits: 07-13 Honda TRX 420 FE and FM Rancher Please contact us with fitment questions. Description: The outer brake cover needs a new seal, as you can see in the pictures, but everything else seems to be in...