Brakes and Control

Part came from a: 96 Polaris Xpress 400 Fits: 95-00 Polaris Xpress Xplorer 300 400 Please contact us with fitment questions. Description: This master cylinder will need flushed out before use, but it does build pressure as it should

Part came from a: 03 Suzuki LT 160 Fits: 89-04 Suzuki LT 160 Please contact us with fitment questions. Description: This brake drum shows normal signs of wear but nothing excessive, can be used as is.

Part came from a: 03 Suzuki LT 160 Fits: 89-04 Suzuki LT 160 Please contact us with fitment questions. Description: These brake panel parts all look to be in good usable condition

Part came from a: 03 Suzuki LT 160 Fits: 94-04 Suzuki LT 160 Please contact us with fitment questions. Description: The bearings and seals in the wheel hub feel ok, but it is recommended they be replaced. The brake panel works as it should. Can be used...

Part came from a: 96 Polaris Xpress 400 Fits: 96 Polaris Xpress Xplorer 400 Please contact us with fitment questions. Description: The shifter is missing the cap for the handle and it has a small crack. The shifter itself moves and locks in place as it...

Part came from a: 96 Polaris Xpress 400 Fits: 96 Polaris Xpress 300 400 Please contact us with fitment questions. Description: These calipers have been tested and they works as they should, and the bleeders both move. The slide boots will need replaced,...

Part came from a: Fits: 94-97 Polaris Sportsman 400 Please contact us with fitment questions. Description: This shifter is missing the handle and the lower boot is melted. Unsure if the switch harness works, and the shift shafts move with quite a bit...

Part came from a: Fits: 06 Cobra CX 50 SR King Please contact us with fitment questions. Description: The caliper and cylinder have been tested and they both work as they should. Only issue is the coating on the hose is disintegrating. A good usable...

Part came from a: Fits: 06 Cobra CX 50 SR King Please contact us with fitment questions. Description: This brake pedal looks to still be in good usable condition

Part came from a: 03 Suzuki LT 160 Fits: 94-04 Suzuki LT 160 Please contact us with fitment questions. Description: The seal in this cover looks ok but it is recommended it be replaced before use. Can be used as is

Part came from a: 03 Suzuki LT 160 Fits: 03-04 Suzuki LT 160 Please contact us with fitment questions. Description: This brake pedal and rod both look to be in good usable condition

Part came from a: 96 Polaris Xpress 400 Fits: 96-99 Polaris Xpress 300 400 Please contact us with fitment questions. Description: This thumb throttle looks to still be in good usable condition