Body and Frame

Part came from a: 97 Honda VLX 600 Shadow Fits: 91-98 Honda Vlx 600 Shadow Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. Good usable part with only normal signs...

Part came from a: 97 Honda VLX 600 Shadow Fits: Please contact us with fitment questions. Description: These are aftermarket foot pegs, they have some slight surface rust starting which should come out with an SOS pad. The paint is starting to chip...

Part came from a: 97 Honda VLX 600 Shadow Fits: 88-07 Honda VLX 600 Shadow Please contact us with fitment questions. Description: There is some rust on the underneath side, but the top looks good, it is sturdy and still a good usable part.

Part came from a: 94 Yamaha Timberwolf 250 Fits: 92-00 Yamaha Timberwolf 250 2x4 4x4 Please contact us with fitment questions. Description: This skid plate shows normal signs of wear but nothing excessive

Part came from a: 94 Yamaha Timberwolf 250 Fits: 92-00 Yamaha Timberwolf 250 2x4 Please contact us with fitment questions. Description: This is what was left over from parting the unit out, what you see is what you get

Part came from a: 94 Yamaha Timberwolf 250 Fits: 92-00 Yamaha Timberwolf 250 2x4 4x4 Please contact us with fitment questions. Description: This cover has some melted spots from a welder, the top is faded and the decals were blown off from pressure...

Part came from a: 94 Yamaha Timberwolf 250 Fits: 92-00 Yamaha Timberwolf 250 2x4 4x4 Please contact us with fitment questions. Description: These straps are still flexible and usable.

Part came from a: 91 Yamaha Champ 100 Fits: 87-91 Yamaha YFM 100 Champ, 92-01 YFM 80 Badger Please contact us with fitment questions. Description: This cover has most of one side broken away, and it does not seal all the way around. Would be better than...

Part came from a: 00 Yamaha YFM 400 Kodiak 2x4 Fits: 00-01 Yamaha YFM 400 Kodiak 2x4 Please contact us with fitment questions. Description: Small batch of hardware left over after parting out a Kodiak chassis. What you see is what you get.

Part came from a: 00 Yamaha YFM 400 Kodiak 2x4 Fits: 00-01 Yamaha YFM 400 Kodiak 2x4 Please contact us with fitment questions. Description: Pretty beat up with a few decent size cracks and holes, but better than nothing if yours are missing completely.

Part came from a: 00 Yamaha YFM 400 Kodiak 2x4 Fits: 00-01 Yamaha YFM 400 Kodiak 2x4 Please contact us with fitment questions. Description: Some light surface rust but is straight and usable with no damaged welds or major issues. Bearings are older and...

Part came from a: 00 Yamaha YFM 400 Kodiak 2x4 Fits: 00-01 Yamaha YFM 400 Kodiak 2x4 Please contact us with fitment questions. Description: Has two bolts stuck in two of the mounts.