Suspension

Part came from a: 98 Honda CR250 CR 250 Fits: 98-99 Honda CR250 CR 250 Please contact us with fitment questions. Description: This has some heavy wear under the chain guard but its still usable. Should replace the rubber guard before use. Tensioner...

Fits: 98 - 99 Polaris Scrambler 500 4x4 98 - 99 Polaris Scrambler 400 4x4 Please contact us with fitment questions. Description: Usable rear shock, bench tested good but you can see where there has been oil leaking from the seal head. Can be used as is...

Part came from a: 07 Suzuki RMZ250 RMZ 250 Fits: 07-09 Suzuki RMZ250 RMZ 250 (4 STROKE) Please contact us with fitment questions. Description: This felt good both on the bike and on the bench tester. Adjusters are all good and the shaft does not have...

Fits: 86-87 Honda ATC 200X Please contact us with fitment questions. Description: This is a used forks, both upper tubes are slightly bent. Also pitting about 10" above fork seals. Will need serviced with new seals and oil.

Fits: 10-11 KTM 250/300 XC/XCW and 12 Husaberg 300 TE Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. We guarantee this part to be good.

Fits: 01 - 02 Yamaha YZ 250F Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. Forks leak and will need new seals, but no pitting on the chrome. Adjusters all work...

Part came from a: 08 KTM 450 SXF Fits: 08 KTM 450 505 SXF Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. Felt good both on the bike and on the bench tester. Good...

Part came from a: 84 Yamaha YTM 225 DX Tri Moto Part Fits: 83-85 Yamaha YTM 225 DX Tri Moto Please contact us with fitment questions. Description: These have very little dampening left and will need to be rebuilt before use. Travel area is ok but...

Fits: 01 - 03 Yamaha Raptor YFM 660 R Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. Ball joints do not have excessive wear and are still usable as is.

Fits: 98 - 02 Honda CR 80 R 03 - 07 Honda CR 85 R Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. Has chain wear but not worn too deep and is still usable.

Fits: 98 Honda CR 80 R Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. Shock bench tested good and did not leak or have pitting, but the upper adjuster is stuck and...

Fits: 01 - 04 Honda TRX 250 EX Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. Bearings have excessive wear and will need replaced. Ball joints feel fine but the...