Suspension

Fits: 98 - 02 Honda CR 80 R 03 - 07 Honda CR 85 R Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. Has chain wear but not worn too deep and is still usable.

Fits: 98 Honda CR 80 R Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. Shock bench tested good and did not leak or have pitting, but the upper adjuster is stuck and...

Fits: 01 - 04 Honda TRX 250 EX Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. Bearings have excessive wear and will need replaced. Ball joints feel fine but the...

Part came from a: 92 Suzuki DR350S DR 350 S Part Fits: 90-96 Suzuki DR350S DR 350 S Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. There is some pitting at...

Fits: 01 - 05 Yamaha Raptor YFM 660 Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. Has a couple broken bolts in the axle carrier clamp, and a missing thread insert...

Fits: 91-01 Harley Davidson Touring Models Please contact us with fitment questions. Description: This is a used set of rear lowering shocks, they are 12" and considered very low for a Harley, just so your aware.

Part came from a: 99 Kawasaki KX125 KX 125 Part Fits: 99 Kawasaki KX125 KX 125 Please contact us with fitment questions. Description: These leak and have very little dampening. Not sure if its because they are empty or if they need rebuilt. Tubes...

Fits: 87 Suzuki DR 100 Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. Has minor pitting above where the lower triple clamp sits, but the seal travel area is clean...

Part came from a: 97 Honda CR250 CR 250 Part Fits: 97 Honda CR250 CR 250 Please contact us with fitment questions. Description: This is not blown and bench tested good but felt a bit soft on the bike and is probably due for a rebuild. Does not leak...

Fits: 99-05 Yamaha TTR 250 Please contact us with fitment questions. Description: This is a used part that has been tested and inspected to ensure quality. Will need serviced with new fork seals. Has some wear marks and dents on the lower fork tubes...

Fits: 01-05 Yamaha Raptor 660 Please contact us with fitment questions. Description: Swingarm bearings are little loose and should be replacd. Two bad thread inserts on the top and the two rear threads need a tap ran through them because the threads look...

Part came from a: 08 Kawasaki KVF 650 SRA Brute Force Part Fits: 05-13 Kawasaki KVF 650 SRA Brute Force (SOLID REAR AXLE MODELS ONLY) Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and...