Suspension

Fits: 91-01 Harley Davidson Touring Models Please contact us with fitment questions. Description: This is a used set of rear lowering shocks, they are 12" and considered very low for a Harley, just so your aware.

Part came from a: 99 Kawasaki KX125 KX 125 Part Fits: 99 Kawasaki KX125 KX 125 Please contact us with fitment questions. Description: These leak and have very little dampening. Not sure if its because they are empty or if they need rebuilt. Tubes...

Fits: 87 Suzuki DR 100 Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. Has minor pitting above where the lower triple clamp sits, but the seal travel area is clean...

Part came from a: 97 Honda CR250 CR 250 Part Fits: 97 Honda CR250 CR 250 Please contact us with fitment questions. Description: This is not blown and bench tested good but felt a bit soft on the bike and is probably due for a rebuild. Does not leak...

Fits: 15" eye to eye Please contact us with fitment questions. Description: Not sure the brand but aftermarket dual rate shocks. Feel good but the bump stops are falling apart and some light pitting on shaft. Be good idea to take them apart and clean...

Fits: 99-05 Yamaha TTR 250 Please contact us with fitment questions. Description: This is a used part that has been tested and inspected to ensure quality. Will need serviced with new fork seals. Has some wear marks and dents on the lower fork tubes...

Fits: 01-05 Yamaha Raptor 660 Please contact us with fitment questions. Description: Swingarm bearings are little loose and should be replacd. Two bad thread inserts on the top and the two rear threads need a tap ran through them because the threads look...

Part came from a: 08 Kawasaki KVF 650 SRA Brute Force Part Fits: 05-13 Kawasaki KVF 650 SRA Brute Force (SOLID REAR AXLE MODELS ONLY) Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and...

Fits: 96 - 98 Yamaha Big Bear YFM 350 2wd 96 - 97 Yamaha Big Bear YFM 350 4x4 FW Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. Plan on replacing the bearings but...

Fits: 99 Yamaha Big Bear 400 and Kodiak 400 Please contact us with fitment questions. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. Will need new wheel bearings, I removed old bearings and cleaned end up...

Part came from a: 01 Honda XR200 XR 200 Part Fits: 94-02 Honda XR200 XR 200 Please contact us with fitment questions. Description: The lower triple tree has some surface rust and a bolt stuck in a mount. Travel area is in good shape. Will need seals...

Part came from a: 03 Suzuki RM60 RM 60 Part Fits: 03 Suzuki RM60 RM 60 / Should also fit 88-03 Kawasaki KX60 (PN 44070-5007) Please contact us with fitment questions. Description: This is a good usable part with only normal signs of wear and use but...